1 / 6 · Click the photo to enlarge
DOMINOX JJ1322 Mini Tube Cutter, 1/8 to 7/8 in
Model JJ1322
1/8-7/8in
A cutter the size of a matchbox for tubing you can barely reach.
Specifications
- Model
- JJ1322
- Cuts
- 1/8 to 7/8 in O.D.
- Wall
- under 0.1 in
- Body
- Zinc alloy
- Size
- 2.56 x 1.5 in
- Weight
- 6.4 oz
- In the box
- Mini tube cutter with wheel fitted
What it does
Behind a water heater there is no room to swing a full cutter. This one is 2.5 inches across and needs little more than the tube's own width to turn.
It cuts copper, brass, aluminium and thin stainless from 1/8 to 7/8 inch, brake line included. Grooved rollers keep the tube from walking.
Good to know before you buy
- Wall thickness under 0.1 inch only.
- Not for thick rigid tube or PVC.
- The small knob is slow on large tube. For 1 inch and up use the CT-650.
More DOMINOX Tubing Tools
-
3-flute
1/2 in Tubing Reaming and Deburring Tool
A three-flute pen for the inside edge of brake, fuel and AC lines.
1/2in
-
CT-369FHA-1
CT-369 4-in-1 Tube Bender
Four grooves, four sizes: 3/16, 1/4, 5/16 and 3/8 inch soft tubing, bent to 180 degrees.
0-180°
-
CT-308
CT-308 Refrigerant Recovery Plier
Clamps on a sealed copper line and pierces it, so the charge goes to your recovery machine.
4-8mm